Demonfx New Basss Guitar Effect Pedal Call76 Compact Compressor Pedal With True Bypass

DRY: The Dry control varies the amount of dry. Uncompressed signal present at the pedal’s output. thereby mixing the original, uneffected signal back in with the compressed signal. You can adjust the balance between the compressed and uncompressed signals by adjusting the Out and Dry knobs accordingly. Correct adjustments should deliver the increased sensitivity and sustain of the compressed signal, combined with the greater dynamic integrity of the uncompressed signal.

OUT: The Out control simply determines the level of the signal present at the pedal’s output. This can be set in order to keep the overall effected level close to that of the dry (bypass)signal. Alternatively, the level can be increased to help project a guitar solo.

IN: The Call76 features a very nice studio-grade input preamplifier. This works as an interface between the guitar and the compressor sections. In exactly the same way, a studio-engineer will first amplify a dry guitar signal before applying additional processing. The In control allows the user to vary the gain of this preamplifier. Turning the In control clockwise increases the overall gain of the pedal. This also increases the amount of compression.

HPF: The HPF knob controls the cut-off frequency of a high-pass filter positioned in the compressor’s sidechain circuitry. Attenuating low frequencies from the sidechain has the effect of freeing up the low bass strings from excessive compression, This fattens the tone of your instrument and lets the low strings breathe. Dynamic control is still fully active for the higher registers, meaning that any slaps and pops are suitably taken care of! Turning the HPF knob clockwise will raise the cut-off frequency and free up more of the low end.

RATIO; Turn the Ratio control clockwise to increase the compression ratio. The Ratio control allows the user to adjust the amount of gain reduction applied for any given increase in guitar signal. At the lowest ratio setting, doubling the input signal (an increase of 100%)will result in the output increasing by 19%. At the highest ratio setting, the output would rise by only 3.5% for the same increase in input signal. The latter case represents “limiting”.

Key Features:

100% Class-A discrete signal path

Classic, ultra fast”FET” response

Studio-grade discrete-transistor preamp

Combined Attack/Release control

Dedicated Ratio control

Dry Blend control for parallel compression

Variable-frequency sidechain filter (HPF) control

Rugged jewel-lamp gain reduction metering

Optimised for bass but can process any source

High-current, low-noise electronics

Ultra-wide frequency response

Ultra-high input impedance

Silent switching

High-quality”signal-conditioning”bypass mode

Premium components throughout

Advanced power supply filtering and protection

Flexible external power requirements (9-18VDC)

PSU Spec.78mA @ 9V / 103mA@ 18V

Please note:

1. Due to the lighting effect, the color of the item shown in the picture may be a little different from the real one. It is just for your reference only.
2. The measurement allowed error is +/- 1cm.

Packing List:

1* Effect Pedal